4017B

Directional pattern: Supercardioid, lobe-shaped

Principle of operation: Pressure gradient with interference tube

Cartridge type: Pre-polarized condenser

Frequency response: 20 Hz – 20 kHz, with permanent 3rd order high-pass filter at 50 Hz

Effective frequency range (±2 dB at 60 cm): 70 Hz – 18 kHz with typ. 3 dB soft boost at 15 kHz

Sensitivity (nominal, ±2 dB at 1 kHz): 19 mV/Pa (−34.4 dB re. 1 V/Pa)

Equivalent noise level (A-weighted): Typ. 13 dB(A), max 15 dB(A) re. 20 µPa

Equivalent noise level (ITU-R BS.468-4): Typ. 24 dB, max 26 dB

Distortion (THD < 1%): 134 dB SPL RMS / 137 dB SPL peak

Dynamic range: Typ. 124 dB

Maximum SPL (THD 10%): 138 dB SPL peak

Switchable attenuation / filters: High boost +4 dB at 8 kHz; low cut first-order filter below 120 Hz

Rated output impedance: 100 Ω

Minimum load impedance: 2 kΩ

Cable drive capability: Up to 100 m (328 ft)

Output balance principle: Signal balanced

Common mode rejection ratio (CMRR): > 40 dB

Power supply: P48 phantom power

Current consumption: 4.5 mA

Connector type: XLR-3M

• Pin 1: Shield

• Pin 2: Signal (+ phase)

• Pin 3: Signal (− phase)

Color: Matte black

Weight: 75 g (2.65 oz)

Microphone diameter: 19 mm (0.75 in)

Capsule diameter: 19 mm (0.75 in)

Microphone length: 212 mm (8.3 in)

Maximum output voltage (RMS): 2.0 V

Polarity: Positive pressure produces +V at pin 2

Operating temperature range: −40°C to 45°C (−40°F to 113°F)

Relative humidity tolerance: Up to 90%