5100

Directional pattern: Directional

Principle of operation: Pressure with interference tube and separation baffles

Cartridge type: Pre-polarized condenser

Frequency response:

• L, C, R, LS, RS: 20 Hz – 20 kHz

• LFE: 20 Hz – 120 Hz

Effective frequency range (±2 dB):

• L, C, R: 200 Hz – 16 kHz

• LS, RS: 100 Hz – 12 kHz

• LFE: 20 Hz – 120 Hz

Sensitivity (nominal, ±3 dB at 1 kHz):

• L, C, R: 26 mV/Pa

• LS, RS: 28 mV/Pa

Equivalent noise level (A-weighted):

• L, C, R: Typ. 18 dB(A), max 21 dB(A)

• LS, RS: Typ. 20 dB(A), max 23 dB(A)

Equivalent noise level (ITU-R BS.468-4):

• L, C, R: Typ. 29 dB, max 32 dB

• LS, RS: Typ. 31 dB, max 34 dB

Distortion (THD < 1%): 120 dB SPL RMS / 123 dB SPL peak

Dynamic range:

• L, C, R, LS, RS: 103 dB

• LFE: 100 dB

Maximum SPL (THD 10%): 132 dB SPL peak

Rated output impedance: 50 Ω

Cable drive capability: Up to 100 m (328 ft)

Output balance principle: Active signal balanced

Common mode rejection ratio (CMRR): > 60 dB (50 Hz – 20 kHz)

Power supply: P48 phantom power

Current consumption: Typ. 5 mA (max. 5.5 mA)

Connector type: Lemo multipin

Color: Black

Weight: 500 g (17.6 oz)

Microphone dimensions (W × H × D): 240 × 140 × 195 mm (9.4 × 5.5 × 7.7 in)

Capsule diameter: 5.4 mm (0.21 in)

Cable length: 5 m (16.4 ft)

Cable diameter: 9.3 mm (0.37 in)

Maximum output voltage:

• L, C, R, LS, RS: 1.8 Vrms / 2.5 Vpeak

• LFE: 1 Vrms / 1.4 Vpeak

Polarity: Positive pressure produces +V at pin 2

Operating temperature range: −40°C to 45°C (−40°F to 113°F)

Relative humidity tolerance: Up to 90%