4098 Gooseneck Mic

Directional pattern: Supercardioid

Principle of operation: Pressure gradient

Cartridge type: Pre-polarized condenser

Frequency response: 20 Hz – 20 kHz

Effective frequency range (±2 dB at 20 cm):

• MicroDot: 80 Hz – 15 kHz with 3 dB soft boost at 8–15 kHz

• XLR-3M: 100 Hz – 15 kHz with 3 dB soft boost at 8–15 kHz and a permanent 2nd-order low-cut filter at 80 Hz

Sensitivity (nominal): 16 mV/Pa; -36 dB re. 1 V/Pa (±3 dB at 1 kHz)

Equivalent noise level (A-weighted): Typ. 23 dB(A), max. 26 dB(A)

Equivalent noise level (ITU-R BS.468-4): Typ. 35 dB, max. 38 dB

Distortion (THD < 1%): 130 dB SPL RMS, 133 dB SPL peak

Dynamic range: Typ. 110 dB

Maximum SPL (THD 10%): 135 dB SPL peak

Rated output impedance:

• MicroDot: 30–40 Ω

• XLR / DAD6001-BC adapter: 100 Ω

Minimum load impedance: 2 kΩ

Cable drive capability:

• MicroDot: up to 300 m (984 ft) with DAD6001-BC XLR adapter

• XLR-3M: up to 100 m (328 ft)

Output balance principle: Signal balanced with XLR connector or DAD6001-BC XLR adapter

Common mode rejection ratio (CMRR): > 60 dB (50 Hz – 15 kHz with adapter)

Power supply (for full performance):

• MicroDot: 5–10 V via DPA adapter (wireless) or P48 via adapter

• XLR-3M: P48 phantom power

Current consumption: Typ. 1.5 mA (microphone), 3.5 mA with DAD6001-BC XLR adapter

Connector: MicroDot or XLR-3M

Weight:

• MicroDot versions: 12 g (16 cm), 20 g (28 cm), 28 g (43 cm), 55 g (77 cm), 67 g (122 cm)

• XLR-3M versions: 75 g (20 cm), 80 g (32 cm), 88 g (47 cm), 115 g (77 cm), 127 g (122 cm)

Microphone diameter: 5.7 mm (0.22 in)

Microphone length:

• MicroDot: 16, 28, 43, 77, 122 cm

• XLR-3M: 20, 32, 47, 77, 122 cm

Polarity: +V at MicroDot pin for positive sound pressure (pin 2 on XLR)

Temperature range: -40°C to 45°C (-40°F to 113°F)

Relative humidity: Up to 90%